Contents:
1 x 500 ml Spray Bottle
Instructions
- Wipe Down the handpiece with a damp disposable cloth to remove all debris
- Connect the nozzle adapter to the back end of the handpiece
Spray lubricant into handpiece for approximately 3 seconds - Lubricate the handpiece chuck and speed ring by inserting
1-2 drops of oil then excercise (open and close chuck/turn
speed ring side to side. - Connect handpiece to an air supply.
- Run motor for 10 seconds to ensure the lubricant has reached all moving parts
- Dry the exterior of the handpiece with a dry towel to remove any expelled fluid or debris. The handpiece should be comp- letely dry at this point.
Direction For Use
Shake gently use. For best results, spray from a Distance Of 12 inches (30 cm). Keep can upright & maintain full pressure on valve while spraying. Spray uniformly over the spray.
Cautions
Pressurized container. Store away direct sunlight or other heat sources. Do not store at temperatures above 50°C. Do not spray on naked flame or ignited materials. Do not puncture or discard container into fire even when empty.
Limitations
- The manufacturer shall accept no liability whatsover for any damages caused by accidental or international use or misuse of the products. The manufacturer's liability is limit to cost of product in case of manufacturing defects. No claims will be entertained for consequential damages under any circumstances.
- Various grades of I-Max Sprayare available for different applications.
Customer are advised to seek clarifications to meet their expectations, or test the samples thoroughly before commercialization.
