MR Dental Rapid Repair Powder

MR Dental Rapid Repair Powder is 100% compatible with any Rapid Repair Liquid available.

Contents: 1 Jar
Net Weight : 400 g
Gross Weight : 525 g

Instruction For Use:-

Meadway Rapid Repair Acrylic Non Slumping - Quick Setting

No "Pressure Pot" Needed For Hard Dense Repairs, Additions or Relines.

Instructions

Preparation
The broken denture addition or reline is prepared in the usual way.

Mixing
The powder & liquid are mixed to a creamy consistency (1.3g powder to 1.0ml liquid). Care should be taken when mixing to ensure that no air is trapped.

Application
After approximately 30 seconds, the mix is ready to use & a thin coat should be applied over all the prepared & into the cracks. The material will then begin to reach the 'non-slumping' so that the remainder of the repair / addition can be built up. Care must be taken to ensure that no air is trapped during these operations.

Curing
It is not necessary to use a 'pressure pot' to cure this material & perfect results will be produced, provided no air as been trapped during the mixing or building up stages, although, pot could be used, if desired to speed-up the process. The setting time in atmospheric conditions is 15 to 17 minutes at 21°C.

Store in a cool dry place way from direct sunlight. Shake well & read instructions before use.

Manufactured in England by
MR. Dental Supplies Limited
4, Manor Way, Old Woking
Surrey, GU22 9JX, England
Tel: +44(0) 1483 773282
E-mail : info@mrdental.co.uk
Website : www.mrdental.co.uk