RRP Insta Pearl Non Peroxide Teeth Whitening Kit

RRP Insta Pearl – Non-Peroxide Teeth Whitening Kit for Safe, Professional Results

RRP Insta Pearl by Ramen Research Products is a professional-grade non-peroxide teeth whitening kit designed for safe and effective tooth whitening without causing enamel damage or sensitivity. Ideal for dental clinics, this kit provides visibly whiter teeth in just one session using a unique combination of whitening gel and accelerator.

With easy-to-follow preparation and application steps, the system uses mechanical polishing followed by a chemical reaction to gently lift stains and brighten the enamel surface.

Kit Contents:

• 1 x 20g Whitening Paste

• 2 x 3ml Whitening Gel

• 1 x 5ml Accelerator Liquid

• 4 x 0.5g Accelerator Powder

• 1 x Rubber Cup

Key Features:

• 😁 Non-Peroxide Formula – Safe on Enamel

• ✨ Whitening Without Sensitivity

• 🦷 Quick, Visible Results in 1 Session

• 🧪 Unique Gel + Accelerator Technology

• ✅ Ideal for Clinical Use with Detailed Instructions

Bring back your patients' bright smiles—safely and effectively—with RRP Insta Pearl.

DIRECTION FOR USE:

PREPARATION: # Open one ampoule of Accelerator powder, to it add 20-25 drops of Accelerator liquid. Close the cap of the ampoule tightly and shake it propoerly until a clear homogenous mix is attained. The mix can be emptied into a glass dappen dish or any clean container/pot. # Attach rubber cup to the micromotor hand piece and set it at a slow speed. # Keep applicator tips/ cotton pellets ready.
1. Before proceeding for whitening it is advised to do a proper ultrasonic scaling of the teeth making sure to remove all the stains.
2. Apply the Whitening Paste uniformly on the tooth surface. Polish the tooth surface with rubber cup at a slow speed making sure every surface of tooth is well polished.
3. Once the polishing is done, rinse the teeth thoroughly and air-dry it.
4. Isolate the segment where the whitening will be carried out.
5. Verify the flow of the Whitening gel before placing it intraorally.
6. Apply the Whitening gel evenly on the dried tooth surface, making sure the entire tooth surface is well covered with blue gel.
7. With the applicator tip / cotton pellet apply the accelerator mix to the whitening gel and slowly rub on the tooth surface. Make sure the accelerator mix is well applied on the whitening gel.
8. On application of the accelerator mix to the whitening gel, the blue color of the whitening gel will change and there will be micro bubbles seen.
9. Leave this on the tooth surface for 10-15 minutes, during which accelerator mix/whitening gel can be re-applied.
10. Rinse the teeth surface properly and dry it. See the change in color. If needed steps 6-7-8-9 can be followed once again.

RAMEN RESEARCH PRODUCTS
H.O:78A,T.C Road, Kolkata-700 053
Helpline: +91 6289 873 317 E-mail:ramens.customercare@gmail.com

Unit No. RCC-2A, 2nd Floor, Kasa Industrial Park, Andul Road, Duilya lalardhar, Andul, Howrah-711 302, W.B.

PRODUCT OF INDIA

FOR USE IN DENTISTRY