SDI Conseal F Pit & Fissure Sealant

SDI CONSEAL F FLUORIDE RELEASING PIT AND FISSURE SEALANT

7% FILLED WITH A SUBMICRON FILLER SIZE OF 0.04 MICRONS TO WITHSTAND SURFACE WEAR
0.41mm TIP DIAMETER

LIGHT CURED FLUORIDE RELEASING
PIT AND FISSURE SEALANT

Conseal F is the lowest viscosity resin sealant available enabling it to flow faster and deeper into the prepared pits and fissures. The Conseal F nozzle, one third of the size of other brands, enhances complete sealing and retention by allowing a deeper penetration into the smallest pits and fissures. Provided in the Conseal F kit a low viscosity etchant gel specifically designed for pit and fissure etching.

FLUORIDE RELEASE
Conseal F combines the proven SDI sealant technology with an intensive initial fluoride boost in conjunction with long term fluoride treatment. The unique Conseal F filler component, with its blend of particles and high surface-to- area volume ratios, enables high fluoride release. Fluoride enhances caries prevention, remineralization, and the inhibition of enamel demineralization.

LOWEST VISCOSITY
Conseal F is the lowest viscosity sealant. The ideal low viscosity allows Conseal F to flow faster and deeper into the prepared pits and fissures. A recognized cause of pit and fissure sealant failure is an inability to seal. The tighter seal optimizes Conseal F’s mechanical retention and eliminates the space required for bacteria to grow. Conseal F’s tight seal is further enhanced by its unique UDMA resin system’s lower shrinkage and by being BIS-GMA free, avoiding the controversy of Bisphenol A.

DEEPER PENETRATION

LOW VISCOSITY SUPER ETCH LV
SDI has created a specialized blue gel 37% phosphoric acid etchant for sealants, in a direct delivery system. Super Etch LV’s lower viscosity improves the acid’s surface contact for deeper etchant penetration into the pits and fissures. The deeper acid penetration strengthens the mechanical bond and the retention success of Conseal F sealants.

DEEPEST PENETRATION
Conseal F is available in direct placement syringes. Both have pre-bent, superfine dispensing tips which facilitate controlled, direct extrusion for faster procedures and allow direct dispensing into previously difficult to reach areas. The Conseal F nozzle, one third the size of other brands, enhances complete sealing and retention by allowing penetration into the deepest pits and fissures; crevasses that will not admit the dispensing tips of other materials.

TIP SIZE COMPARISON**
Conseal F’s syringe tip diameter opening is only 0.41mm; significantly smaller than the alternatives of 1.5mm or 1.3mm.

ADVANTAGES

• No Bis-Phenol A or it’s derivativesExtremely low viscosity - quickly and deeply
• penetrate pits and fissures
• Accurate and controlled delivery
• with 27 gauge tips
• 7% filled – fluoride releasing
• Opaque white shade
• Low viscosity etchant gel provided
• in the intro kit

RANGE OF COLORS
Conseal F is available in opaque white.
Conseal is available in light grey.

HYGIENIC PLACEMENT
The Conseal F offers a direct and hygienic way of dispensing the sealant, eliminating the risk of cross contamination.

BIO COMPATIBLE
Conseal F’s low water solubility minimizes breakdown of the sealant in the oral environment.